WinMLS 2000 3

Developed by Morset Sound Development - Windows - setup file WinMLS2000_Release3Build010c.exe (8.90 MB) - Shareware

Buy or select mirror:

Buy $39

Developer Link 1 (non https WinMLS2000_Release3Build010c.exe)
Developer Link 3 (non https)
Developer Link 4 (non https)
Download3k US (WinMLS2000_Release3Build010c.exe)
Download3k EU (WinMLS2000_Release3Build010c.exe)

MD5: 8f022fe9f720d0211b2ae53d086276a4

All files are original. Download3K does not repack or modify downloads in any way. Check MD5 for confirmation.

Developer Description

"For audio/acoustical/vibrational measurements"

Perform audio, acoustical and vibrational measurements user-friendly, accurate and flexible using a sound card. WinMLS2000 is widely used by professionals. Now low-cost versions allow the amateur to perform professional loudspeaker and room measurements. User friendliness is ensured through default setups for the standard measurements (e.g. sound system calibration, THD+N and harmonic distortion, reverberation time in rooms. Portable and lightweight measuring equipment, using blank pistol and laptop PC. Flexible hardware, most soundcards are supported (>50 have been tested). Input and output levels can easily be set using the built-in software mixer. The mixer levels can easily be calibrated. Calibration of hardware allows for measurement of absolute levels such as voltage and SPL. Calibration of microphone using either calibrator or nominal microphone sensitivity. Can be upgraded to 24 channels with sample-accurate synchronization (sound card dependent). Supports selection from multiple sound cards. Sampling rates up to 96 kHz in standard version. Special version is able to measure above 100 kHz using sampling rate 215 kHz (sound card dependent). High signal to noise ratio, using internally generated MLS loudspeaker signals with optional low-frequency boosting or speech filters. Measurement modes: MLS, sinusoid, user defined excitation and scope. (Swept sine excitation will be included). Influence of measurement system can be subtracted. Auto-name generator for saving data. Can use standard WAV, ASCII, MLSSA TIM file formats. Initial time delay (distance from loudspeaker to microphone) can be measured sample-accurate with all supported sound cards. Toolbars can be removed from the user interface to maximize the screen area used to display the plot(s). Data can be exported, or plotted using powerful graphics. Full and third-octave band analysis, dBA, dBB, dBC and waterfall plots. Many features for comparing several curves in a plot.

Requirements: Pentium is recommended

What's new in this version: THD+Noise, improved useage of setups, see readme-file for details

Antivirus information

Download3K has downloaded and tested WinMLS 2000 on 24 Jul 2017 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results:

Avast:
Clean
Avira:
Clean
Kaspersky:
Clean
McAfee:
Clean
NOD32:
Clean