NetGear WNR834M RangeMax Next Wireless Router Firmware NA 1.4.23

NetGear WNR834M RangeMax Next Wireless Router Firmware NA 1.4.23

Developer's description
Published by NetGear on 26 Mar 2010
  • Size

    6.00 MB
  • License

    Freeware
  • OS

    Windows
  • Price

    $0
  • Updated

    26 Mar 2010
  • Downloads

    338 (1 last week)

"Wi-Fi Certified™ 802.11n draft 2.0"

Wi-Fi Certified™ 802.11n draft 2.0

* WN511T and WN311T users must update their driver to be interoperable at 802.11n mode with this version of firmware.

You MUST Reset the router to default settings after upgrading the firmware

This version is for North America Only!

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

New Features:

1. 802.11n draft 2.0 Certified

To Upgrade:

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button to the right.
3. Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
7. After the router boots up, log in the router again.
You MUST Reset the router to default settings after upgrading the firmware
8. Click Maintenance > Backup Settings
9. Click Erase. The router reboots when the Erase operation is done.
10. If you would like to check that the upgrade was successful, log in to the router again at http://192.168.1.1, and check the firmware version.
11. Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router.

Before installing version 1.4.23 of NetGear WNR834M RangeMax Next Wireless Router Firmware NA for Windows make sure this is the latest version available and that it works with your current operating system and device model. If the driver contains release notes ("readme" files) proceed with reading them first. Second recommended step is creating a restore point to help you later on in case you install the wrong device driver. Note that some drivers will work instantly after installing them, but others will require a system restart in order to function properly.

As an alternative, you can simplify the process of installing the latest versions for your drivers by using a program to scan all your drivers and compare them with the latest available versions from the manufacturers. We recommend Driver Scanner from Uniblue for such a task. Download it and run a free driver scan here.

Top user review

There are no user reviews. Be the first to review this software.

Antivirus information

Download3K has downloaded and tested NetGear WNR834M RangeMax Next Wireless Router Firmware NA on 11 Apr 2012 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results:
  • Avira:

    Clean
  • Kaspersky:

    Clean
  • NOD32:

    Clean
NetGear WNR834M RangeMax Next Wireless Router Firmware NA Antivirus Report
User rating
0/5 (0 votes)
Your rating
Your review