D-Link DWL-2100AP High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point Firmware 2.13
Published by D-Link on 26 Mar 2010
"Do NOT upgrade firmware on any D-Link pr..."Do NOT upgrade firmware on any D-Link product over a wireless connection.
Failure of the device may result. Use only hard-wired network connections.
¤ Remove the default setting user name “user”.
¤ The password field should have current password
Before installing version 2.13 of D-Link DWL-2100AP High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point Firmware for Windows make sure this is the latest version available and that it works with your current operating system and device model. If the driver contains release notes ("readme" files) proceed with reading them first. Second recommended step is creating a restore point to help you later on in case you install the wrong device driver. Note that some drivers will work instantly after installing them, but others will require a system restart in order to function properly.
As an alternative, you can simplify the process of installing the latest versions for your drivers by using a program to scan all your drivers and compare them with the latest available versions from the manufacturers. We recommend Driver Scanner from Uniblue for such a task. Download it and run a free driver scan here.
Updated26 Mar 2010
Downloads2,216 (1 last week)
Top user review
There are no user reviews. Be the first to review this software.
Download3K has downloaded and tested D-Link DWL-2100AP High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point Firmware on 15 Mar 2012 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results: