Home
Drivers
Network
NetGear
NetGear WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware 1009

NetGear WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware 1009

Publisher's description
File details
Antivirus report
"Enhancements Since Version 1007 1...."
Published by NetGear on 26 Mar 2010
Publisher support

  • Size:

    0.67 MB

  • License:

    Freeware

  • OS:

    Windows

  • Price:

    $0

  • Updated:

    26 Mar 2010

  • Downloads:

    90 (0 last week)
Enhancements Since Version 1007

1. Fixed configuration settings not saved properly.
2. Corrected lack of connection status when PPPoE is in used to connect to ISP.
3. Fixed blank WAN IP address issue on the Status page provided by WGR101 router manager.

Enhancements Since Version 1001

1) Added WPA-PSK.
2) Added PPPoE as Internet connection method.
3) Improved throughput: now it is up to 23 Mbps.
4) Fixed the bug that if SSID's broadcast is disabled, wireless clients can not connect to the device.

Known Problems:

1) The WGR101 does not support PPTP and L2TP as Internet connection method. WGR101 will not work with any ISP using PPTP or L2TP.

Enhancements Since Version 1000

* Performance Enhancements

Installation Instructions:

* You can upgrade by using the Web interface Router Upgrade menu.
* Before you upgrade write down all current settings as you need to enter them MANUALLY after upgrading. Make sure to record the switch position.

1. Download the link below, saving it to a convenient place such as the desktop.
2. Set switch to position 3. (Consult the Installation Guide if you want to know more about switch positions.)
3. Open the browser and access the router (usually the address is http://192.168.0.1).
4. Log in to the router (User Name = admin and Password = password unless you changed it).
5. Click Maintenance > Router Upgrade.
6. Click Browse and locate the place you saved it in the first step.
7. Click Upload.
8. Wait for the router to reboot.
9. Verify that the router firmware was upgraded by clicking Maintenance > Router Status.
10. Reset router to factory defaults: Click Maintenance > Backup Settings > Revert to Factory Default Settings > ERASE. (OR use the Default Reset button on the rear panel of the router. With the unit powered on, press and hold the Default Reset button until the Test lights, in about 5 seconds. Release the Default Reset button.)
11. Wait for the router to reboot.
12. Reenter the settings you noted before upgrading.
13. Either set the switch to the position you had before, or set switch to position 1, which is the working single user mode.

Before installing version 1009 of NetGear WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware for Windows make sure this is the latest version available and that it works with your current operating system and device model. If the driver contains release notes ("readme" files) proceed with reading them first. Second recommended step is creating a restore point to help you later on in case you install the wrong device driver. Note that some drivers will work instantly after installing them, but others will require a system restart in order to function properly.

As an alternative, you can simplify the process of installing the latest versions for your drivers by using a program to scan all your drivers and compare them with the latest available versions from the manufacturers. We recommend Driver Scanner from Uniblue for such a task. Download it and run a free driver scan here.

Antivirus information

Download3K has downloaded and tested NetGear WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware on 18 May 2012 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results:

  • Bitdefender:

    Clean

  • NOD 32:

    Clean

  • Avira:

    Clean

  • Kaspersky:

    Clean
NetGear WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware Antivirus Report
Complete antivirus report

Notifications

Your email:
Friends email:

Related press releases

Download here
User rating
0/5
(0 votes)
Your opinion