Home
Drivers
Network
D-Link
D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware 1.20

D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware 1.20

Publisher's description
File details
Antivirus report
"Do NOT upgrade firmware on any D-Link pr..."
Published by D-Link on 26 Mar 2010
Publisher support

  • Size:

    1.73 MB

  • License:

    Freeware

  • OS:

    Windows

  • Price:

    $0

  • Updated:

    26 Mar 2010

  • Downloads:

    40 (0 last week)
Do NOT upgrade firmware on any D-Link product over a wireless connection.
Failure of the device may result. Use only hard-wired network connections.

What's New:

Problem Resolved:
- Fixed: Can't edit the public community.
- Modified TX power table for 8200 according the table from PM
- Modified to support new Israel.
- No matter the SSID broadcast is enabled or disabled, the AP in WDS (WDS+AP as well) mode with WPA-PSK/WPA2-PSK should work properly(WDS can't connect when user disabled SSID Broadcast).
- Task dead(failed reboot,after apply setting) when change apmode from WDS to AP by D-View.
- User cann't get wdsclient info at each side,when reboot device on both side at the same time.
- When multi-state enable,and set ssid like "%*",ap will reboot continually.
- [WEB]"Domain Name" in DHCP,which set by AP Manager v1.20 can not display to the Web page.
- The Korea domain should not support turbo mode in 11g band.

Enhancements:
- WMM support for each SSID.
- RADIUS Accounting for each SSID.
- support SSID broadcast “enable/disable” for each SSID
- add Output power control for Korea.
- SMTP support in log setting.
- Configuration file extension from CFG to DCF.
- Change default SSID to “dlink”.
- Add command “get/set SNMP” to control snmp state.
- add 3 get power commands for MFG, they are “getswpower/controlpower/targetpower”
- Add fw upgrade protection policy.
- Support 64Bytes username length for radius authentication.
- Support 64 character WEB login username length.
- support Character Set of WEB login username,include "a~z","A~Z","0~9","@", ".", "-" and "_".
- Pop error message when key in unsupported characters in WEB login user name
- Add Telnet command “Get PassPhrase” to display passphrase of wpa-psk
- Add Telnet command “Get RadiusSecret” to display Radius Secret
- add character filter for SSID,0x20~0x7F(ASCII) set is supported.
- remove character filter for SSID setting.
- Modify the Korea channel to [36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161]

Before installing version 1.20 of D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware for Windows make sure this is the latest version available and that it works with your current operating system and device model. If the driver contains release notes ("readme" files) proceed with reading them first. Second recommended step is creating a restore point to help you later on in case you install the wrong device driver. Note that some drivers will work instantly after installing them, but others will require a system restart in order to function properly.

As an alternative, you can simplify the process of installing the latest versions for your drivers by using a program to scan all your drivers and compare them with the latest available versions from the manufacturers. We recommend Driver Scanner from Uniblue for such a task. Download it and run a free driver scan here.

Antivirus information

Download3K has downloaded and tested D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware on 31 Dec 1969 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results:

  • Bitdefender:

    Clean

  • NOD 32:

    Clean

  • Avira:

    Clean

  • Kaspersky:

    Clean
D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware Antivirus Report
Complete antivirus report

Notifications

Your email:
Friends email:

Related press releases

Download here
User rating
0/5
(0 votes)
Your opinion